Shell Winder - 2nd Shift

About the Role

The operator identifies coil part numbers and quantities from the Run Sheet, retrieves the required small parts, and enters the part numbers into the coil winding machine. Physical tasks include lifting up to 40 lb and performing bending, twisting, grabbing, reaching, standing, walking, pushing, pulling, and using both hands to lift and lower materials, with or without accommodations. The role requires consistent use of personal protective equipment and the ability to work efficiently in hot environments while tolerating loud noises. The employee sets up the coil winding machine, selecting the correct mandrel size, duct parts, insulation tape, paper thickness, wire or bar size, part number, and material alignment. Devices are installed and adjusted, strips, conductors, and insulation paper are loaded, and measurements are taken to verify alignment before activating the machine. The operator follows Run Screen instructions to feed materials, wind coils at the specified rate, and label each coil with ID, work order, part, and clock numbers. The operator oversees and enforces lockout/tagout (LOTO) procedures to ensure safe deactivation and isolation of equipment in compliance with OSHA regulations and organizational safety guidelines. Overhead cranes and hoisting equipment are safely operated to move materials, components, and finished products within the manufacturing facility. Work is performed from quality and production standards and computerized winding sheets/prints, requiring the ability to read and comprehend written safety, quality, and operating instructions. • Identify coil part numbers and quantities from run sheets. • Retrieve and input required small parts into the winding machine. • Use personal protective equipment and work in hot, noisy environments. • Set up coil winding machine with correct mandrel, duct parts, tape, paper, and wire specifications. • Install, adjust, and load strips, conductors, and insulation paper. • Measure, align, and verify materials before activating the machine. • Follow run screen instructions to wind coils at specified rates and label them accurately. • Operate various hand and power tools, including hydraulic, brazing, soldering, and welding equipment. • Crimp wire to static shielding, apply pack‑out, and tape‑weld pre‑cut leads. • Rework damaged coils to meet quality standards and perform routine machine upkeep. • Weigh, log, and dispose of scrap metal according to protocols. • Enforce lockout/tagout procedures to ensure safe equipment isolation. • Safely operate overhead cranes and hoisting equipment. • Read and interpret quality, production, and safety documentation.

Key Responsibilities

• ▸coil winding
• ▸machine setup
• ▸tool operation
• ▸lockout/tagout
• ▸crane operation
• ▸quality docs

What You Bring

Qualified applicants with an arrest or conviction history will be considered in accordance with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act, and related local laws. Applicants are not required to disclose their conviction history or undergo a background check until a conditional job offer is made. To request a disability‑related reasonable accommodation for the job search, application, or interview process, candidates may call 1‑800‑836‑6345; only accommodation requests will be accepted at this number. • Lift up to 40 lb and perform physical tasks such as bending, twisting, and reaching.

Requirements

• ▸heavy lifting
• ▸physical tasks
• ▸fair chance
• ▸disability accommodations

Work Environment

Onsite