Millwright III

About the Role

A Millwright installs, assembles, dismantles, maintains, troubleshoots, and repairs machinery at a combined-cycle power plant, working on heat recovery steam generators, gas and steam turbines, large generators, and related equipment. The role involves working with high‑complex precision machines such as ball mills, turbines, generators, and hydraulic systems; planning, inspecting, and documenting work; using precision alignment tools; fitting bearings, aligning gears, installing shafts and conveyors; dismantling and assembling equipment; operating lathes, grinders, and rigging equipment; performing preventive maintenance; and following supervisor directions. • Works with industry-specific and high complex precision machines including but not limited to: ball mills, ID fans, lube coil skids, turbines, conveyors, generators, hydraulic systems, pumps, gears, bearings, compressors etc. • Will plan, inspect, verify and document scope of work • Uses precision leveling and alignment tools in order to measure angles, material thickness and small distances with calipers, squares, micrometers, optical instruments and other tools. • Will fit bearings, align gears and wheels, attach motors and connect belts according to manufacturer’s blueprints and drawings • Will dismantle machines using hammers, wrenches, crowbars and other hand tools • Assembles and installs equipment such: shafting, conveyors and tram rails • Assembles machines and bolts, welds, rivets and fastens machinery to foundations or other structures using hand tools and power tools. • Operates engine lathes, grinders and files. • May construct foundations for machinery • Fabricates and installs parts, equipment and machinery by measuring, cutting, drilling and/or welding • Turns machine parts to dimensional specifications • Will unload, inspect, move and set equipment into position using cranes, hoists, dollies, rollers and trucks • Uses rigging and hoisting devices such as chokers, chain falls and come alongs to move equipment / materials into place • Conducts preventative maintenance such as lubrication and fixing or repairing worn parts. • This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. • Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. • Will occasionally work at heights, climb ladders and stairways and work off of platforms. • Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Key Responsibilities

• ▸machine installation
• ▸precision alignment
• ▸equipment dismantling
• ▸preventive maintenance
• ▸rigging operations
• ▸tool operation

What You Bring

Candidates must have 4‑5 years of industrial construction/maintenance experience, at least 3 years as a millwright in power generation, ability to read blueprints and technical manuals, proficiency with industrial hand and power tools, possession of required journeyman tools, reliable transportation, and willingness to work seven days as needed. Applicants should demonstrate a solid industrial construction background, knowledge of hand, power, and layout tools, understanding of load properties for rigging, ability to use certified hand signals, strong problem‑solving, math, communication, and teamwork skills, and the capacity to lead others while adhering to safety and company values. Preference is given to candidates with NCCER Journeyman Industrial Millwright certification, former Zachry employment or ROF status, basic computer proficiency, and formal technical education. The millwright does not have direct reports but may oversee helpers and laborers; the job requires extensive standing, walking, bending, lifting up to 50 lb, occasional heights work, and the ability to work outdoors in various weather conditions for up to 12‑hour shifts while wearing required PPE. The position requires a specified set of hand tools and equipment, including a toolbox, measuring devices, hammers, wrenches, and safety gear such as hard hat and steel‑toe boots, and Zachry is committed to providing a safe, drug‑free, equal‑opportunity work environment. • Must have experience with industrial machinery installation, repair and maintenance of Power Generation machines and equipment • Must know how to read blueprints, schematic drawings and engineering specifications and understand how to read and interpret technical manuals in order to determine work procedures • Must have experience using industrial hand tools and power tools • Must have all Journeyman Precision Millwright hand tools – see tool list attachment • Minimum 4-5 years industrial construction/maintenance experience • Minimum of 3 years Millwright experience in Power Generation Plants • Must have reliable transportation and be able to work 7 days as needed • Demonstrated industrial construction/maintenance history experience • Knowledge of hand tools, power tools and layout tools such as lasers, ultrasonic measuring and alignment tools, plumb bobs, cutting torches, welding machines, hydraulic torch wrenches, hydraulic stud tensioners, soldering guns and metal working equipment that includes lathes and grinding machines. • Knowledge of industrial machinery and equipment • Understand load properties of cables, ropes, hoists and chains • Demonstrated ability to use certified hand signals • Good problem-solving abilities • Good aptitude and manual dexterity • Knowledge of math concepts, geometry and layout • Demonstrated ability to lead others and provide detailed instructions • Good reading comprehension • Ability to work with others – team player • Ability to work independently – minimal supervision • Good communication skills with co‑workers and supervisors • National Center for Construction Education and Research’s (NCCER) Certification for Journeyman Industrial Millwright. • Former Zachry Employee. • Basic Computer efficiency • Formal/technical education. • Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. • Will talk and hear to communicate. • Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. • May be required to lift, carry and move up to 50lbs. • Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. • Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. • 1 • Tool Box with Lock • 1 • Center Punch • 1 • 12' Tape Measure • 1 • Torpedo Level • 1 – Scribe • 1 • Pair Channel Locks • 1 • 10" Pipe Wrench • 2 • Screwdrivers Flat (6" & 8") • 1 • Magnetic Indicator • 1 • Hacksaw Frame • 1 • Pair of Leather Gloves • 1 • 12oz Ball Peen Hammer • 1 • 4lb Hammer • 1 • Pry Bar • 1 • Slip Joint Pliers • 1 • Needle Nose Pliers • 1 • Tin Snip • 1 • 18" Carpenter Level • 1 • Dial Indicator • 1 • 0" to 1" Micrometers • 1 • Cold Chisel • 1 – Punch • 1 • Feeler Gauge • 1 • Putty Knife • 1 • 6" Driver • 1 • 6" Inside & Outside Calipers • 1 • 6" Machinist Level • 1 • 12" Machinist Level • 1 – Raincoat • 1 – Rubber boots

Requirements

• ▸nccer certified
• ▸power generation
• ▸blueprint reading
• ▸hand tools
• ▸3+ years
• ▸technical education

Benefits

• 1 • Combination Wrench Set

Work Environment

Onsite